New Aftermarket
About Roadsafe
Roadsafe offer you Australia’s most comprehensive Steering & Suspension components manual. Following its release to the market in November 2007, Roadsafe have not stopped working on it!
Now incorporating over 3 years of research work, Roadsafe are constantly improving and adding to the manual to ensure it is the leader in the Australian market.
With more than 2700 known vehicle applications, featuring over 3000 individual lines in both our Roadsafe and O.E.M. Products ranges, plus an additional range of over 700 lines in our ‘555’ Japanese brand, we believe that our steering and suspension line-up is the most comprehensive in Australasia, with continued part number development as needs are identified.
Roadsafe, together with our parent company Camelot Design Industries Group Pty. Ltd., is the major supplier of steering and suspension components to the Australian automotive aftermarket. As a consequence, our part numbers are the most widely used in Australia. For the convenience of users of the new manual we have also included known alternative numbers for many applications.
The manual has been further enhanced by adding numerous parts photographs and suspension set-up illustrations to assist in identifying ‘difficult’ components.
With more than 2700 known vehicle applications, featuring over 3000 individual lines in both our Roadsafe and O.E.M. Products ranges, plus an additional range of over 700 lines in our ‘555’ Japanese brand, we believe that our steering and suspension line-up is the most comprehensive in Australasia, with continued part number development as needs are identified.
All Roadsafe parts are manufactured to Quality Standards and are inspected and tested to ensure the company’s high quality requirements are maintained prior to release to the market place. Roadsafe have worked exceptionally hard over the past years to build new and better features into both the products and ranges.
As manufacturing technology has improved, so too have the parts. The Roadsafe range of components have undergone some radical changes over the past years, to build extra special features into the parts. The outcome being, numerous benefits to ensure a superior long life product.
Full encapsulation also means that there is no need for grease nipples. Many alternative brands offer encapsulated product, but still offer the provision for greasing with a grease nipple, which is unnecessary. If actually greased in these circumstances, the grease has nowhere to go, and if pressure is continued, greasing can result in the dislocation of the base plate and subsequent failure of the joint. Where Roadsafe’s new product is fully encapsulated it is supplied without grease nipples.
Steering & Suspension Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The majority of Passenger Vehicle steering & suspension products as distributed by Roadsafe Automotive Products Pty. Ltd. (RSV), including Roadsafe, O.E.M. Products and 555 Sankei Japan brands, carry a 36 month or 100,000kms (whichever occurs first) warranty. 4WD, Taxi and Commercial Vehicle steering & suspension products as distributed by Roadsafe Automotive Products Pty. Ltd. (RSV), including Roadsafe, O.E.M. Products and 555 Sankei Japan brands, carry a 24 month or 40,000kms (whichever occurs first) warranty. This warranty is applicable to components supplied for specific applications as listed in the Roadsafe/OEM Components Manuel, from date of purchase by original purchaser. If any item as covered by this warranty, correctly selected and fitted by qualified persons (Registered and Accredited Mechanic), fails to operate in the manner for which is was designed due to manufacturers defect in workmanship or materials, the item may be returned to the source of purchase with original invoice. The original purchaser will contact RSV and, if the warranty claim is found to be acceptable, will receive replacement item free of charge. RSV's sole responsibility relating to the terms of this warranty, if any, shall be the replacement of the particular product as indicated. RSV assumes no responsibility for damages or failure due to improper selection, installation, mishandling, severe off-road use, abuse, labour claims or any consequential damages.
There are various items within the range whereby 36 month/100,000 or 24 month/40,000 kms warranty terms are not applicable - this exclusion relates specifically to items used in 4WD off-road applications and items with inherant design characteristics from genuine, whereby the loads and conditions to which the joint is subjected means normal warranty conditions cannot apply. These items will be managed on a case by case basis as/if required. All ball joints that have been designed by the OE supplier to be in a 'load carrying tension position' will be covered by a 24 month/40,000 kms warranty (whichever occurs first). This will include, but is not limited to, BJ3562L, BJ3562R, BJ55, BJ426, BJ426L+ARM , BJ426R+ARM, BJ3396R , BJ3396L etc. Items fitted to vehicles with wheel and/or suspension design changes from standard are excluded from warranty. Such suspension design changes include either the lifting or lowering of vehicles. Such wheel changes predominately mean the fitment of wheels and tyres larger than standard. Unfortunately, some wheel or suspension design changes, alter both the steering geometry and forces applied to existing components that can have an effect on individual components, that have been manufactured to specific tolerances and operating angles. This warranty statement incorporates the exclusive expression of warranties by RSV and is in lieu of any and all other warranties expressed or implied.
Individual State Regulation - 'Hard-Core' 4wd Products
There are many individual State & Federal laws governing the changes you can make to your 4WD if it is to be used for public road use in Australia. Roadsafe Automotive Products Pty. Ltd. supply a range of 'hard core' products for off-road, competition vehicle use. Roadsafe Automotive Products Pty. Ltd. at no time implies or suggests that any 'hard core' 4WD products sold or supplied from Roadsafe are legal and/or approved for public road use. Roadsafe Automotive Products Pty. Ltd., and/or any of their employed staff, is not in any position to give any legal advice on the rules, regulations or legalities of any products sold or fitted for any public road use in any specific state or territory, or part of Australia. It is solely up to the end purchaser to check with Local / State Transport Department to determine if these products are legal to be used on your vehicle for public road use. Roadsafe Automotive Products Pty. Ltd. accepts no responsibility for products supplied if they do not meet relevant state approvals to be used on Australian Roads.
Now incorporating over 3 years of research work, Roadsafe are constantly improving and adding to the manual to ensure it is the leader in the Australian market.
With more than 2700 known vehicle applications, featuring over 3000 individual lines in both our Roadsafe and O.E.M. Products ranges, plus an additional range of over 700 lines in our ‘555’ Japanese brand, we believe that our steering and suspension line-up is the most comprehensive in Australasia, with continued part number development as needs are identified.
Roadsafe, together with our parent company Camelot Design Industries Group Pty. Ltd., is the major supplier of steering and suspension components to the Australian automotive aftermarket. As a consequence, our part numbers are the most widely used in Australia. For the convenience of users of the new manual we have also included known alternative numbers for many applications.
The manual has been further enhanced by adding numerous parts photographs and suspension set-up illustrations to assist in identifying ‘difficult’ components.
With more than 2700 known vehicle applications, featuring over 3000 individual lines in both our Roadsafe and O.E.M. Products ranges, plus an additional range of over 700 lines in our ‘555’ Japanese brand, we believe that our steering and suspension line-up is the most comprehensive in Australasia, with continued part number development as needs are identified.
All Roadsafe parts are manufactured to Quality Standards and are inspected and tested to ensure the company’s high quality requirements are maintained prior to release to the market place. Roadsafe have worked exceptionally hard over the past years to build new and better features into both the products and ranges.
As manufacturing technology has improved, so too have the parts. The Roadsafe range of components have undergone some radical changes over the past years, to build extra special features into the parts. The outcome being, numerous benefits to ensure a superior long life product.
- Boot Fitment
- Boot Material
- Ball Pin - Material
- Ball Pin – Hardness
- Ball Pin – Movement
- Encapsulation
Full encapsulation also means that there is no need for grease nipples. Many alternative brands offer encapsulated product, but still offer the provision for greasing with a grease nipple, which is unnecessary. If actually greased in these circumstances, the grease has nowhere to go, and if pressure is continued, greasing can result in the dislocation of the base plate and subsequent failure of the joint. Where Roadsafe’s new product is fully encapsulated it is supplied without grease nipples.
- Nylon Seat
- Phosphate Coating
Steering & Suspension Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The majority of Passenger Vehicle steering & suspension products as distributed by Roadsafe Automotive Products Pty. Ltd. (RSV), including Roadsafe, O.E.M. Products and 555 Sankei Japan brands, carry a 36 month or 100,000kms (whichever occurs first) warranty. 4WD, Taxi and Commercial Vehicle steering & suspension products as distributed by Roadsafe Automotive Products Pty. Ltd. (RSV), including Roadsafe, O.E.M. Products and 555 Sankei Japan brands, carry a 24 month or 40,000kms (whichever occurs first) warranty. This warranty is applicable to components supplied for specific applications as listed in the Roadsafe/OEM Components Manuel, from date of purchase by original purchaser. If any item as covered by this warranty, correctly selected and fitted by qualified persons (Registered and Accredited Mechanic), fails to operate in the manner for which is was designed due to manufacturers defect in workmanship or materials, the item may be returned to the source of purchase with original invoice. The original purchaser will contact RSV and, if the warranty claim is found to be acceptable, will receive replacement item free of charge. RSV's sole responsibility relating to the terms of this warranty, if any, shall be the replacement of the particular product as indicated. RSV assumes no responsibility for damages or failure due to improper selection, installation, mishandling, severe off-road use, abuse, labour claims or any consequential damages.
There are various items within the range whereby 36 month/100,000 or 24 month/40,000 kms warranty terms are not applicable - this exclusion relates specifically to items used in 4WD off-road applications and items with inherant design characteristics from genuine, whereby the loads and conditions to which the joint is subjected means normal warranty conditions cannot apply. These items will be managed on a case by case basis as/if required. All ball joints that have been designed by the OE supplier to be in a 'load carrying tension position' will be covered by a 24 month/40,000 kms warranty (whichever occurs first). This will include, but is not limited to, BJ3562L, BJ3562R, BJ55, BJ426, BJ426L+ARM , BJ426R+ARM, BJ3396R , BJ3396L etc. Items fitted to vehicles with wheel and/or suspension design changes from standard are excluded from warranty. Such suspension design changes include either the lifting or lowering of vehicles. Such wheel changes predominately mean the fitment of wheels and tyres larger than standard. Unfortunately, some wheel or suspension design changes, alter both the steering geometry and forces applied to existing components that can have an effect on individual components, that have been manufactured to specific tolerances and operating angles. This warranty statement incorporates the exclusive expression of warranties by RSV and is in lieu of any and all other warranties expressed or implied.
Individual State Regulation - 'Hard-Core' 4wd Products
There are many individual State & Federal laws governing the changes you can make to your 4WD if it is to be used for public road use in Australia. Roadsafe Automotive Products Pty. Ltd. supply a range of 'hard core' products for off-road, competition vehicle use. Roadsafe Automotive Products Pty. Ltd. at no time implies or suggests that any 'hard core' 4WD products sold or supplied from Roadsafe are legal and/or approved for public road use. Roadsafe Automotive Products Pty. Ltd., and/or any of their employed staff, is not in any position to give any legal advice on the rules, regulations or legalities of any products sold or fitted for any public road use in any specific state or territory, or part of Australia. It is solely up to the end purchaser to check with Local / State Transport Department to determine if these products are legal to be used on your vehicle for public road use. Roadsafe Automotive Products Pty. Ltd. accepts no responsibility for products supplied if they do not meet relevant state approvals to be used on Australian Roads.
About Lunds
HPPLunds is a private, wholly Australian owned company and a wholesale supplier to the automotive aftermarket. Industrial, Rural, Paint, Marine and Hardware Markets.
Effectively formed in December 2007 after the acquisition of High Performance Products – a successfully operated wholesale distribution company to the automotive aftermarket for some 17 years; and then merged with Lunds 4WD Parts & Accessories – a successfully operated parts supplier to the 4WD market for 30 years.
HPPLunds has the main distribution centre in Jackson Road, Sunnybank Hills, Brisbane and
a supply distribution centre in Kings Park Sydney. With account managers on the east coast and agents in Adelaide, Perth & New Zealand HPPLunds services accounts throughout Australia and New Zealand.
So what makes up this new look HPPLunds
Effectively formed in December 2007 after the acquisition of High Performance Products – a successfully operated wholesale distribution company to the automotive aftermarket for some 17 years; and then merged with Lunds 4WD Parts & Accessories – a successfully operated parts supplier to the 4WD market for 30 years.
HPPLunds has the main distribution centre in Jackson Road, Sunnybank Hills, Brisbane and
a supply distribution centre in Kings Park Sydney. With account managers on the east coast and agents in Adelaide, Perth & New Zealand HPPLunds services accounts throughout Australia and New Zealand.
So what makes up this new look HPPLunds
- National Distributor for many iconic brands in the Australian Auto Parts Aftermarket
- In 4WD over 4,500 parts numbers in new 4WD parts for Toyota Hilux and Landcruiser and some parts for Nissan and Suzuki 4WD vehicles.
- Importer and manufacturer of our own brands including – Drive Force; JetPower; Patriot Abrasives; Rock Tools; Fleet Accessories; NRG Electrical; Gear-X Wheel Trims & Tie Downs; Gasmiser Gaskets now known as Drive Force Gaskets & J-B Weld
- DriveForce:
- JetPower:
- Patriot:
- NRG:
- Gear-X:
- Fleet:
- Rock Tools:
- Lunds:
- J-B WELD:
About SSS
A leader in quality automotive replacement parts in Australia for over 29 years.
SSS Auto Parts Pty Ltd established in 1987, has since grown to be one of the largest and leading suppliers of imported new genuine and aftermarket automotive crash parts in Australia.
Aftermarket:
NPP stock high demand auto body parts such as:
We have a large range of produts to suit most Nissan Patrol models and we can also carry other makes and models.
Genuine Parts:
Real thing. Unreal price.
Need a genuine part but don't want to pay outrageous prices?
Talk to your us. As one of the leading suppliers of automotive body parts in Australia, SSS Auto Parts can supply Genuine Factory Parts* at a fraction of the cost you'd expect to pay anywhere else.
So if you've got the body, we've got the parts.
OEM:
We are proud to distribute the world's best automotive lighting
SSS Auto Parts Pty Ltd established in 1987, has since grown to be one of the largest and leading suppliers of imported new genuine and aftermarket automotive crash parts in Australia.
Aftermarket:
NPP stock high demand auto body parts such as:
- Body panels
- Bumpers & bar reinforcements
- Grilles
- Lights and fog lights
- Mirrors
- Fans and shrouds
- Radiators & radiator support panels
- Window regulators
- Washer & radiator overflow bottles
- Indicator switches
We have a large range of produts to suit most Nissan Patrol models and we can also carry other makes and models.
Genuine Parts:
Real thing. Unreal price.
Need a genuine part but don't want to pay outrageous prices?
Talk to your us. As one of the leading suppliers of automotive body parts in Australia, SSS Auto Parts can supply Genuine Factory Parts* at a fraction of the cost you'd expect to pay anywhere else.
So if you've got the body, we've got the parts.
OEM:
We are proud to distribute the world's best automotive lighting
- Hella develop and manufacture lighting technology and electronics products for the automotive industry and has one of the world's largest organisations for vehicle parts and accessories.
- We stock Valeo who is one of the world's leading automotive supplier that is fully focused on the design, production and sale of components, integrated system and modules for the automotive industry.
Sterling Parts
Sterling Parts is one of Australia's key players in new aftermarket replacement automotive parts. From our humble beginnings in 1997, we have grown to become one of the leaders in the industry. We ensure that you get premium quality parts and service at affordable prices.
We stock a full range of parts, for all makes - Holden, Ford, Japanese, Korean, European, other American - you name it - we've got it. Our wide range of products are founded on both mechanical, suspension and body parts. We currently stock over 30,000 types of parts and our range is growing by the day.
We are your one stop aftermarket specialist, with branches in Sydney, Melbourne, Adelaide and Brisbane. Our deliveries run a minimum of twice a day, covering the metropolitan areas which we are situated. We also support those not in those metropolitan areas by providing freight to anywhere in the world using our extensive logistics network.
We stock a full range of parts, for all makes - Holden, Ford, Japanese, Korean, European, other American - you name it - we've got it. Our wide range of products are founded on both mechanical, suspension and body parts. We currently stock over 30,000 types of parts and our range is growing by the day.
We are your one stop aftermarket specialist, with branches in Sydney, Melbourne, Adelaide and Brisbane. Our deliveries run a minimum of twice a day, covering the metropolitan areas which we are situated. We also support those not in those metropolitan areas by providing freight to anywhere in the world using our extensive logistics network.